Kontrol-Karriers with Power Drum Tilt Control

195 Series Powered Drum Handler

Kontrol-Karriers with Power Drum Tilt Control

Lift, rotate and pour a heavy drum with your hoist or crane
Morse engineers have designed these below-hook lifting devices with motor driven drum tilt for below hook applications. More than just a 55-gallon drum dumper (210 liter drum dumper), you have full 360 degree control of the powered drum rotation to dispense with this industrial lifting equipment.

IMPORTANT: Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Power Tilt Kontrol-Karriers
Model 195A-1-115 shown has Power Tilt Kontrol-Karrier with AC power tilt control has a two-button control pendant.

  • Motorized drum rotation 360o in both directions
  • AC Power Tilt models have 2-button pendant on 7 foot cord (2.1 m cord)
  • Air Power Tilt models have 3 position control valve on 6 foot (183 cm) hose
  • Available with single phase AC motor, 3-phase AC motor, or air motor
  • Designed for 22.5″ (57 cm) diameter 55-gallon steel drum (210 liter steel drum). See options below for other drum types and sizes.
  • Capacity: 1500 Lb. (680 kg) Full drum, 800 Lb. (363 kg) Half-full drum
  • Order the correct size Diameter Adaptor for each smaller drum

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Related products information
Related Morse Product Details

Posted in Uncategorized.