Below-Hook Drum Carriers

Drum Tilters – Drum Dispensers
Lift, move and pour a drum below-hook with your hoist or crane

More than just a drum dumper or drum inverter…
…drum carriers for controlled drum dispensing

Lift, rotate and control the pour of your drum with Morse drum carriers.

IMPORTANT: Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

  • Use the menu on the right to select the right Morse Kontrol-Karrier to lift and pour your drum(s)
  • Power-Tilt Kontrol-Karriers add ergonomic power-tilt to below the hook drum tilters
  • Drum Karriers for pouring within operator reach

These drum dispensers allow you to tilt drum 3600 in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt control options

  • Kontrol-Karriers have pull chain and chain wheel drum tilt control (shown above left)
  • Drum Karriers require manually turning drum by hand
  • Available with optional hand crank drum tilt control
  • Also available with 16″ (41 cm) hand wheel drum tilt control

Related products information
Related Morse Product Details

185 Series

Posted in Uncategorized.