Category Archives: Uncategorized

4-Wheel Drum Truck Assembly

Posted on by

160 Series 4 Wheel Drum Trucks / Barrel Handling Trucks

Ergonomic Drum Trucks to move and dispense a heavy drum with ease.
4 Wheel Drum Trucks / Barrel Handling Trucks
Ergonomic Drum Trucks to move and dispense a heavy drum with ease.

Morse 4 wheel drum hand trucks

For good reason, model 160 4-Wheel Industrial Drum Truck is our best selling drum truck. The innovative design provides extra safety, ease of use, and versatility.

With this ergonomic drum truck you can load and unload a heavy drum with ease and move a drum quickly and easily in narrow aisles while keeping your hands protected inside the U-shaped Knuckle Saving Handle. Even pour a drum into a 5-gallon (20 liter) pail. The four wheels fully support the drum’s weight, so maneuvering is easy, it turns on a dime. . . and you don’t have to support or balance the load.

Stainless Steel Drum Trucks

Model 160-SS with polyolefin wheels mounted inside the frame.
Model 160-WP-SS for rough terrain has rubber tires mounted outside the frame.

Made of finished type 304 stainless steel, these drum trucks are corrosion resistant, and have no paint to wear or chip off.

The innovative design of this stainless steel barrel hand truck provides extra safety, ease of use, and versatility.

Optional Clamp-On Strap assists in breaking your drum over onto stainless steel drum truck
Strap assists in breaking your drum over onto the stainless steel barrel truck

Stainless steel barrel truck shown with Optional Clamp-On Strap for rimless plastic drum

Related products information
Related Morse Product Details
Related Morse Product Details



4-Wheel Drum Trucks

Posted on by

160 Series 4 Wheel Drum Trucks / Barrel Handling Trucks

Ergonomic Drum Trucks to move and dispense a heavy drum with ease.
4 Wheel Drum Trucks / Barrel Handling Trucks
Ergonomic Drum Trucks to move and dispense a heavy drum with ease.

Morse 4 wheel drum hand trucks

For good reason, model 160 4-Wheel Industrial Drum Truck is our best selling drum truck. The innovative design provides extra safety, ease of use, and versatility.

With this ergonomic drum truck you can load and unload a heavy drum with ease and move a drum quickly and easily in narrow aisles while keeping your hands protected inside the U-shaped Knuckle Saving Handle. Even pour a drum into a 5-gallon (20 liter) pail. The four wheels fully support the drum’s weight, so maneuvering is easy, it turns on a dime. . . and you don’t have to support or balance the load.

Stainless Steel Drum Trucks

Model 160-SS with polyolefin wheels mounted inside the frame.
Model 160-WP-SS for rough terrain has rubber tires mounted outside the frame.

Made of finished type 304 stainless steel, these drum trucks are corrosion resistant, and have no paint to wear or chip off.

The innovative design of this stainless steel barrel hand truck provides extra safety, ease of use, and versatility.

Optional Clamp-On Strap assists in breaking your drum over onto stainless steel drum truck
Strap assists in breaking your drum over onto the stainless steel barrel truck

Stainless steel barrel truck shown with Optional Clamp-On Strap for rimless plastic drum

Related products information
Related Morse Product Details
Related Morse Product Details

Hydra-Lift Karriers

Posted on by

400 Series Drum Dumpers with Manual Lift and Tilt

Hydra-Lift Drum Karriers
Drum Dumpers are part of the Morse ergonomic MORCINCHTM Drum Handling System that enable you to safely lift and control pouring of almost any drum.

Model 400A-72 drum dumper has 72″ maximum dispensing height with chain wheel drum tilt.
Also available:
Model 400A-60 has Hand Crank drum tilt control with 72″ lift
Model 400A-96 has Pull Chain drum tilt control with 96″ lift

Drum dumpers available with 2 different lift heights
Hydra-Lift drum dumpers are available with 72″ or 96″ (183 or 244 cm) maximum lift height.

Maximum lift height is measured from the floor to the lowest point of a horizontal 55-gallon (210 liter) steel drum.

Standard Manual-Lift and Manual-Tilt Controls style=”border:1px solid black;margin:10px 0px 10px 0px;” src=”../images/P96MK1939-P_controls_sm.png” alt=”Hand pump to control lift and lower of drum”>
Hand pump for drum lift

  1. Pump handle to LIFT drum
  2. Release valve to LOWER drum

Related products information
Related Morse Product Details

Options and Accessories
ME-4560-P Kit: Top Rim Clamp for rimmed 55-gallon (210 liter) plastic drum
ME-4556-P Kit: Bracket Assembly required for rimless 55-gallon (210 liter) drum
ME-55/30 Series Diameter Adaptors for various sizes of smaller drum
ME-3900i-P Factory Installed MORStop Tilt-Brake
ME-X02-400-72 Factory Installed Simple Hand Crank for 72″ (183 cm) manual tilt models
ME-X02-400-96 Factory Installed Simple Hand Crank for 96″ (244 cm) manual tilt models
ME-X03-400-72 Factory Installed 16″ (40.6 cm) Hand Wheel for 72″ (183 cm) manual tilt models
ME-X03-400-96 Factory Installed 16″ (40.6 cm) Hand Wheel for 96″ (244 cm) manual tilt models
ME-5115i-P Factory Installed Web Strap and Ratchet to secure drum in holder (replaces standard cinch chain)
ME-G-400 Factory Installed 3-Piece Drum Holder

Options and Accessories for Models with Spark Resistant Parts
ME-4560M-P Kit: Spark Resistant Top Rim Clamp for rimmed 55-gallon (210 liter) plastic drum
ME-4556M-P Kit: Spark Resistant Bracket Assembly required for rimless 55-gallon (210 liter) drum
ME-55/30M Series Spark Resistant Diameter Adaptors for various sizes of smaller drum
ME-5115Mi-P Factory Installed Web Strap and Spark Resistant Ratchet to secure drum in holder (replaces cinch chain

Heavy-Duty Hydra-Lift Karriers

Posted on by

Morse 410 Series Heavy-Duty Hydra-Lift Karriers

Drum carrier to lift and pour a 1200 Lb. (545 kg) drum up to 72″ (183 cm) high.
Heavy-Duty Hydra-Lift Karriers provide controlled dispensing of your drum.

Safe drum handling requires well-designed, ergonomic drum handling equipment to reduce risks of injury or property damage. Heavy-Duty Hydra-Lift Drum Karriers combine incredible strength with simple drum handling by one person.

With Heavy-Duty Hydra-Lift Karriers you can lift a 1200 Lb. (545 kg) drum, and turn it 360 degrees in either direction to pour up to 72″ (183 cm) high.

Drum carriers are available with battery, electric, or air powered lift and tilt.

Features:

  • Lift, move, rotate and drain your heavy 55-gallon (210 liter) steel drum at up to 72″ (183 cm) maximum pour height
  • Drum Carrier Capacity
    • 1200 Lb. (545 kg) Full drum
    • 600 Lb. (272 kg) Half-full drum*
  • MORCINCH TM drum handling system automatically cinches from 23.5″ down to 22″ diameter drum
  • Dual hydraulic cylinders increase capacity and add stability
  • Parallel legs provide a compact footprint – 65-3/8″ x 35-3/8″ (166 x 90 cm)
  • Durable nylon wheels and swivel casters travel smoothly under heavy load
  • Step-down floor lock holds unit in place while dispensing drum

Options:

  • Install MORCINCH TM Options to handle almost any drum
  • Top Rim Clamp for a rimmed plastic drum
  • Bracket Assembly for a rimless plastic drum, or to more securely hold a fiber drum
  • Diameter Adaptors for various sizes of smaller drums
  • Handle drum with drum faucet or drum cone in place
  • Models available with Spark Resistant Parts

Related products information
Related Morse Product Details



Clamp+Go Handle Preview

Posted on by

Morse Model 24 and 24-SS

Ergonomic Morse Clamp+GOTM Dolly Handle (Patented Design)
The Clamp+GO TM Dolly Handle is a safer and easier way to move many different drum dollies. Quickly disengage the Clamp+GO TM from one drum dolly, and connect to another.

US Patent # US8424886

  • Clamps onto dolly for safer, ergonomic drum transport
  • Adjusts for various dolly wall heights
  • Pivoting handle that stores upright when not in use
  • Designed for use with a drum weighing up to 1000 Lb. (454 kg)

Morse model 24 and stainless steel model 24-SS

Reduce risks to workers with the ergonomic and safety conscious Morse Clamp+GOTM Dolly Handle. Attach Clamp+GOTM to the sidewall of your drum dolly with a downward push to engage the quick-coupling mechanism. Now you’ve got a drum dolly with a handle to pull or push to move your drum around. Easily move into and out of confined areas.

Increase worker safety by moving drum dollies with the Clamp+GOTM Dolly Handle. Don’t risk catching your fingers between the drum and other objects. Drum dollies with handles are far more stable because you apply even force below the drum’s center of gravity.

For safety reasons, use caution to maintain control and avoid tipping when pushing at the top of your drum to move a drum dolly. Lateral force at the top of the drum shifts over 70% of the weight to the front dolly wheels. This can make the dolly difficult to control, and potentially hazardous without warning – even topple over, especially if the dolly wheels hit an obstruction, a hole in the floor, or while descending a slope.

Decrease the risk of this happening by attaching the Clamp+GOTM to the drum dolly. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce risk of tipping.

Related products information
Related Morse Product Details

Clamp+Go TM Dolly Handle

Posted on by

Morse Model 24 and 24-SS

Ergonomic Morse Clamp+GOTM Dolly Handle (Patented Design)
The Clamp+GO TM Dolly Handle is a safer and easier way to move many different drum dollies. Quickly disengage the Clamp+GO TM from one drum dolly, and connect to another.

US Patent # US8424886

  • Clamps onto dolly for safer, ergonomic drum transport
  • Adjusts for various dolly wall heights
  • Pivoting handle that stores upright when not in use
  • Designed for use with a drum weighing up to 1000 Lb. (454 kg)

Morse model 24 and stainless steel model 24-SS

Reduce risks to workers with the ergonomic and safety conscious Morse Clamp+GOTM Dolly Handle. Attach Clamp+GOTM to the sidewall of your drum dolly with a downward push to engage the quick-coupling mechanism. Now you’ve got a drum dolly with a handle to pull or push to move your drum around. Easily move into and out of confined areas.

Increase worker safety by moving drum dollies with the Clamp+GOTM Dolly Handle. Don’t risk catching your fingers between the drum and other objects. Drum dollies with handles are far more stable because you apply even force below the drum’s center of gravity.

For safety reasons, use caution to maintain control and avoid tipping when pushing at the top of your drum to move a drum dolly. Lateral force at the top of the drum shifts over 70% of the weight to the front dolly wheels. This can make the dolly difficult to control, and potentially hazardous without warning – even topple over, especially if the dolly wheels hit an obstruction, a hole in the floor, or while descending a slope.

Decrease the risk of this happening by attaching the Clamp+GOTM to the drum dolly. You then pull from the bottom of the drum to move it around, with weight far more evenly distributed on all dolly wheels. You have greater control, and significantly reduce risk of tipping.

Related products information
Related Morse Product Details



Drum’s View of the Self-Propelled Drum Pourer

Posted on by

Morse strong>< PILOT > Power-Propelled Walk-Behind Drum Handlers Improve Productivity

The new Morse < PILOT > Self-Propelled Drum Handlers feature intuitive, industry-standard throttle, steering and drum positioning controls.

  • Lift up to a 1500 Lb. (680 kg) drum
  • Control power-propelled walkie travel speed with ergonomic twist grip
  • Raise drum up to 10.5 feet (3.2 m) high
  • Raise or lower control handle to actuate walkie brake, and feather for accurate payload positioning

Built-in Safety Systems

  • When released, the walkie handle returns to upright position and applies the “dead-man” brake
  • A “Belly-button” switch helps prevent operator being pinned. Upon contact, it activates low speed reverse direction.

Related products information
Related Morse Product Details



Power Propelled Drum Pourer

Posted on by

Morse < PILOT > Models 900, 905, 910 and 915

Power-Propelled Walk-Behind Drum Handlers Improve Productivity

< PILOT > Model # 900 Lift and Pour a Drum up to 10.5 feet (3.2 m) high.
< PILOT > Model # 905 Scale-Equipped Drum Pourer
< PILOT > Model # 910 Rack a Drum Horizontally up to 10.5 feet (3.2 m) high.
< PILOT > Model # 915 Move and Stack an Upright Drum up to 10 feet (3 m) high.

The new Morse < PILOT > Self-Propelled Drum Handlers feature intuitive, industry-standard throttle, steering and drum positioning controls.

  • Lift up to a 1500 Lb. (680 kg) drum
  • Control power-propelled walkie travel speed with ergonomic twist grip
  • Raise drum up to 10.5 feet (3.2 m) high
  • Raise or lower control handle to actuate walkie brake, and feather for accurate payload positioning

Built-in Safety Systems

  • When released, the walkie handle returns to upright position and applies the “dead-man” brake
  • A “Belly-button” switch helps prevent operator being pinned. Upon contact, it activates low speed reverse direction.

Related products information
Related Morse Product Details



Vertical-Lift Drum Pourer

Posted on by

Morse 510 & 520 Series Mobile Vertical-Lift Drum Pourers

Drum lifters on wheels designed to lift and pour a drum at up to 106″ high (269 cm high)

More than just a drum dumper. . .
. . .controlled drum dispensing

Vertical-Lift Drum Pourers make it simple to raise and pour a heavy drum. You control the drum pouring angle and height while you dispense. The compact base and quality components of this Vertical-Lift drum handler make it easy to maneuver. Pour your drum with a drum faucet or drum cone in place.

Vertical-Lift Drum Pourers provide controlled drum pouring – Turn drum 360o in either direction

  • Two-Stage Vertical-Lift Drum Pourers allow you to pour a drum up to 106″ (269 cm) high
  • Single-Stage Vertical-Lift Drum Pourers allow you to pour a drum up to 60″ (152 cm) high

Capacity

  • 800 Lb. (363 kg) Full drum
  • 500 Lb. (227 kg) Half-full drum*

It’s a CINCH to handle almost any drum, with the
MORcinch Drum Handling System

  • Drum holder automatically cinches for 22″ to 23.5″ (56 to 59.7 cm) diameter drum
  • Accepts MORcinch Options to handle your plastic drum
  • Accepts Diameter Adaptors for your smaller drums
  • Includes safety covered gears for your protection
  • Has durable stress-relief weld joints for years of service
  • Cinch chain has flexible chain cover to help protect drum sidewall
  • Polyester Web Strap and Ratchet Option
  • Vertical-Lift drum handlers are available with

Power Lift and Power Drum Tilt for ergonomic drum pouring

Drum Palletizer with Geared Tilt

Posted on by

Morse Model 82A and Options

Drum Palletizers with Geared Tilt to control drum pouring.
Hand Crank Geared Tilt makes it easy to pour a drum.

Move, palletize and pour a plastic, steel or fiber drum with the Morse Drum Palletizer and Pourers. An ergonomic and safety conscious way to dispense a drum at up to 26″ (66 cm) high. Eliminates the safety risks of manhandling heavy drums. The Geared Tilt feature allows you to control drum rotation 360 degrees end-over-end in either direction.

Morse Drum Palletizers allow you to move drums on and off shipping pallets, spill containment pallets and drum dollies. The V-shaped base is designed so you can raise and place a drum at the corners of a pallet, or straddle a pallet up to 41″ (107 cm) wide and 7″ (17.8 cm) tall.

We recommend the MORStop Tilt-Brake (Option # 3900i-P) factory installed to automatically lock and hold the drum tilt angle, until you turn the hand crank again.

Related products information
Related Morse Product Details
Related Morse Product Details



Options and Accessories