Morse CE-Marked 200 Liter Drum Tumblers
100 to 200 Liter Drum Rotator
CE-Marked 200 Liter Drum Tumblers
Include Controls and Enclosure with Safety Interlock
Designed ONLY for 50Hz Power Supply
These “Corner-Over-Corner” Drum Tumblers mix ingredients right inside a closed drum, saving you Time, Labor and Money!
Blend ingredients inside a plastic drum, steel drum, or fiber drum… One drum mixer to blend them all!
55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum
Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers
Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
Use separate drum for each batch.
Portable 55-gallon drum mixers agitate drum contents without opening the drum!
Utilize important ingredients that would otherwise be left in unmixed sediment.
Eliminate the clean-up of insertion mixers.
Use as a drain stand to dispense into a 5-gallon (20 liter) pail.
Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM
Agitate your drum’s contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.
Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.
The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.
OSHA Requires Enclosure with Safety Interlock for ALL drum rotators
Model 290F Grip+GoTM
Use the new Morse model # 290F GRIP+GOTM power-grip fork mount drum handler to lift, move and pour a drum right from your forklift. You can FULLY invert a drum. . . turning the drum forward 180o. Control the drum tilt function all the way from upright to fully inverted.
Grab a drum off the floor, from a pallet, racking, trucks, etc.
The drum turns down BETWEEN the forks, close to the forklift. The compact design (dimensioned drawing on spec sheet) provides a tight turning radius. And the GRIP+GOTM weighs just 680 Lb. (308 kg) for minimal lost load on your equipment.
Self-contained 12V battery powers the grip and tilt function, requiring no connection to your lift’s power or hydraulics. The battery and charger are included.
The control pendant has built-in safety features to help prevent unintentional release of a drum.
Factory installed Option # 6149i-P Wireless control is available.
The GRIP+GOTM requires 25″ (63.5 cm) between the forks, as the fork pockets are 25″ apart for clearance around a typical 24″ (61 cm) diameter 55-gallon (210 liter) drum.
Model 290F grips a drum with 8″ x 16″ (20 x 41 cm) jaws. The grip pressure is adjustable for handling a steel, plastic or fiber drum.
Handle various drums:
14″ to 24″ (35.6 to 61 cm) diameter
Typical 15-gallon to 55-gallon
(55 to 210 liter)
Capacity: 1500 Lb. (680 kg)
Morse Fork Pocket Kits
Morse Fork Pocket Kits add fork pockets to a below-hook drum handler.
If forks will NOT spread 25″ (63.5 cm) wide to accommodate drum between forks:
Install a Fork Pocket Kit on a Below-Hook Drum Handler
Drum will then be carried below forks. Use with forklift OR with hoist
Kit # 6315-P
Fork Pocket Kit – Add fork pockets to a Morse below-hook drum lifter for safety conscious drum handling with your forklift.
Kit for customer to install fork pockets on Morse Model 85A, 85G, 85i, 86, 185A, 185G, 185A-HD or 185G-HD with 2″ (5.1 cm) wide drum lifter cross tube.
NOT for model with spark resistant parts.
Kit # 6333-P
Fork Pocket Kit – Add fork pockets for safety conscious forklift drum handling with a Morse below-hook drum lifter.
Kit for customer to install fork pockets on Morse Model 185A-GR, 185XGR or on 195 Series with 3″ (7.6 cm) wide drum lifter cross tube.
NOT for model with spark resistant parts.
Related products information Related Morse Product Details
a href=”https://morsedrum.com/product/6315-P” target=”_blank”>Morse ME-5315-P Product Details
Morse Hydra-Lift Drum Rotators lift and roll your closed drum to mix and blend the contents.
The built-in hydraulic system lifts your drum from floor level and places it quickly and easily for rotation on the drum turner.
Drum Rotators Save Time, Labor and Money!
Morse developed the basic concept to provide “hands-off” drum handling and mixing. Enjoy the benefits of easy, ergonomic loading and unloading and eliminate many hazards of manual drum handling.
MORCINCH™ Options to Handle a Plastic Drum, a Fiber Drum, or a Smaller Drum
MORCINCH™ Options allow you to handle a 55-gallon (210 liter) plastic drum, a steel drum, a fiber drum, or even a smaller drum with one Morse drum handler. Many Morse drum handlers accept MORCINCH™Options to handle your 55-gallon plastic drum. A well designed plastic drum handler must take into consideration the fact that plastic drums are flexible and lack the supporting ribs that are on most steel drums. The MORCINCH™ Options below are designed to prevent a plastic drum from slipping through the drum holder. To ensure safety, choose the correct 55-gallon plastic drum holder for your particular drum.
Install on your Morse drum handler. MORCINCH™ Options are NOT drum handlers by themselves.
